Menu Reference

Front Panel Menu Reference "Meas/Setup" Menu

Meas

Setup

The softkey menu structured to this hardkey affects the currently selected

window. Press to select the upper or lower measurement window on the power meter’s display. The window which is selected is highlighted by a shadowed box, and the set up you create is implemented in this window.

Press this hardkey to access the “Meas Setup” menu. This menu allows you to set up a variety of conditions in the currently selected measurement window, for example: an analog or digital display, measurement limits, resolution and channel selection.

•Input Select

Press this softkey to access a menu which allows you to select the channel to be displayed.

■A

Press this softkey to display channel A. Refer to “Channel Measurements”, on page 2-35 for further information.

■B

Press this softkey to display channel B. Refer to “Channel Measurements”, on page 2-35 for further information.

■A/B

Press this softkey to display the ratio of channel A power to channel B power (A/B). Refer to “Making Ratio Measurements”, on page 2-37 for further information.

■B/A

Press this softkey to display the ratio of channel B power to channel A power (B/A). Refer to “Making Ratio Measurements”, on page 2-37 for further information.

■A-B

Press this softkey to display the numerical difference between channel A power and channel B power (A-B). Refer to “Making Difference Measurements”, on page 2-36 for further information.

■B-A

Press this softkey to display the numerical difference between channel B power and channel A power (B-A). Refer to “Making Difference Measurements”, on page 2-36 for further information.

HP EPM-442A User’s Guide

3-13