Getting Started
The Display Layout
Display Tutorial
If you wish to experiment with the display layout before you move on to make measurements, the following procedure guides you through a few of the display setups you can choose.
1.Press Preset
Local
,Confirm .
Notice that the upper window is the one which is highlighted by the dark box.
2.Press 
. The display remains the same apart from the fact that it is now the lower window that is highlighted by the shadowed box.
3.Press SetupMeas , Display Format, Meter Dgtl Anlg (Anlg should be highlighted). The display now shows one analog and one digital window.
4.Press 
. The display now only shows one window. This is the analog window which was selected in the previous step.
5.Press 
. The display now shows only the digital window.
HP |