Getting Started
The Front Panel at a Glance
3.
This hardkey switches the power meter between on and standby. When the power meter is switched to standby (that is, when this hardkey has not been selected but the line power is connected to the instrument) the red LED is lit. When the power meter is switched on the green LED is lit.
4. “System/Inputs” hardkey with softkey menu.
The | System | hardkey allows access to softkey menus which affect |
Inputs |
the general power meter system setup, (for example the
5.Save Recall
This hardkey is the only one that is completely dedicated to the control of the power meter as a system. The only other hardkey
which affects system parameters is the System hardkey. Refer to
Inputs
Chapter 3 for further information about this hardkey and it’s softkey menu.
6. Dedicated “Window” hardkeys with softkey menus.
Meas | , | Rel | , | dBm/W |
Setup | Offset |
|
These hardkeys allow access to softkey menus which affect the setup of the measurement windows. Refer to Chapter 3 for further information about these hardkeys and their softkey menus.
7. Dedicated “Channel” hardkeys with softkey menus.
Frequency | , | Zero |
Cal Fac | Cal |
These hardkeys allow access to softkey menus which affect the measurement channel. Refer to Chapter 3 for further information about these hardkeys and their softkey menus.
8.Channel Inputs.
The HP
HP |