Error Messages

Error Messages

 

Error Messages

-101

Invalid character

 

An invalid character was found in the command string. You may have

 

inserted a character such as #, $, or % in the command header or within

 

a parameter.

 

For example, LIM:LOW O#.

-102

Syntax error

 

Invalid syntax was found in the command string.

 

For example, LIM:CLE:AUTO, 1 or LIM:CLE: AUTO 1.

-103

Invalid separator

 

An invalid separator was found in the command string. You may have

 

used a comma instead of a colon, semicolon, or blank space; or you may

 

have used a blank space instead of a comma.

 

For example, OUTP:ROSC,1.

-105

GET not allowed

 

A Group Execute Trigger (GET) is not allowed within a command string.

-108

Parameter not allowed

 

More parameters were received than expected for the command. You

 

may have entered an extra parameter, or added a parameter to a

 

command that does not accept a parameter.

 

For example, CAL 10.

-109

Missing parameter

 

Fewer parameters were received than expected for the command. You

 

omitted one or more parameters that are required for this command.

 

For example, AVER:COUN.

-112

Program mnemonic too long

 

A command header was received which contained more than the

 

maximum 12 characters allowed.

 

For example, SENSeAVERageCOUNt 8.

4-4

HP EPM-442A User’s Guide