Power Meter Operation
Setting the Resolution
Setting the Resolution
The resolution of each of the power meter’s windows can be set to four different levels (1, 2, 3 or 4).
These four levels represent:
•1, 0.1, 0.01, 0.001 dB respectively if the measurement suffix is dBm or dB.
•1, 2, 3 or 4 significant digits respectively if the measurement suffix is W or %.
The default value is 0.01 dB (3 digits).
To set the resolution on the currently selected window:
1.Press SetupMeas . The current setting of the resolution is highlighted on the Resolution 1 2 3 4 softkey.
2.To change this setting press Resolution 1 2 3 4 until the required resolution setting is highlighted.
HP |