*LogicalDriveSSPState = EnableDisable
*SSPAdaptersWithAccess = [N],[N]...None
HBA_WW_ID = WWN
ConnectionName = UserDefinedName
HostMode = DefaultWindowsWindows(degrade)openVMSTru64Linux SolarisNetwareHPWindows Sp2
Script file options
There are four categories of options in ACU script files: Control, Controller, Array, and Logical Drive. Each category has several scripting options, but you do not always need to assign values to every option. ACU can use default values in some cases, while in other cases, a given option might not be relevant for a particular controller or operating mode.
The options for each category are listed in the table ("Description of option categories in ACU scripting" on page 33), and described in more detail in the rest of this section.
Description of option categories in ACU scripting
Category | Options | Comments |
|
|
|
Control | Action | These options define the overall behavior of ACU |
| Method | when it processes the scripts and creates |
| configurations. Control options can occur only once in | |
|
| |
|
| a script file, and must be the first options listed. |
|
|
|
Controller | Controller | Options in this category define the controller that is to |
| ClearConfigurationWithDataLoss | be configured (or the controller that has had its |
| configuration captured). The Controller option must be | |
| LicenseKey | |
| at the beginning of this section of the script, but you | |
| DeleteLicenseKey | can script other options in this category in any order. |
| RAIDArrayID | You can use one script to configure several controllers |
| ReadCache | if all controllers are to be configured identically, or if |
| you define each controller configuration separately. | |
| WriteCache | |
| When you define each controller separately, specify | |
| RebuildPriority | all category options for a particular controller before |
| ExpandPriority | starting a new controller listing. |
|
| |
| SurfaceScanDelay |
|
| SSPState |
|
|
|
|
Array | Array | These options define an array that is to be configured |
| OnlineSpare | on the controller that is identified previously in the |
| script. (If no controller is previously identified, ACU | |
| Drive | |
| sends an error message.) The Array option must be at | |
|
| the beginning of this section of the script, but you can |
|
| script the other options in this category in any order. |
|
|
|
Scripting in ACU 33
