2If required, review the security certificate notices and tap one of the following:
Trust Certificate: Connects you to the captive portal page automatically whenever you connect to this
Trust Certificate Once: Connects you to the captive portal page for this session only. The next time you try to connect to this
Don't Trust Certificate: Cancels the connection.
3Your
Disconnect from a network
When you disconnect from a network, you can keep it on your list of known networks so that your smartphone can automatically connect to it again. If you remove the network from your list of known networks, however, you must reconnect to the network. Follow the steps in Connect to a new open network or Connect to a new secure network to connect to the network again.
•To disconnect from a network but keep it on your list of known networks: Turn off
•To disconnect from a network and remove it from your list of known
networks: Open . Tap the network name and then tap Forget Network.
Put
By default, your smartphone keeps its
1Open .
2Open the application menu and tap Sleep Settings.
3The current setting is displayed in the When Phone Sleeps field. To change the setting, tap the current setting and then select the other option from the displayed list.
Customise connection settings
Do not change
BEFORE YOU BEGIN You must be connected to the network you want to customise (see Connect to a new open network, Connect to a new secure network or Connect to a previously used network).
1Open .
2Tap the network name.
3In Automatic IP settings, tap On or Off.
•When Automatic IP settings is on, the IP address is automatically and dynamically configured.
•When Automatic IP settings is off, you can manually configure the IP address.
4If you turned Automatic IP settings off, enter any of the following: Address: The IP address of the network
Subnet: The Subnet address of the network
Gateway: The Gateway address of the network
DNS Servers: Addresses (#1 and #2)
You may need to contact your system administrator for this information.
5Tap Done.
140 Chapter 10 : Web and wireless connections