SNMP properties

Use the SNMP Properties dialog shown in Figure 34 to change SNMP configuration parameters. After making changes, click the OK button to put the new values into effect. To open the SNMP Properties dialog, choose one of the following:

Select Switch > SNMP Properties.

Right-click a switch graphic in the faceplate display, and select SNMP Properties from the popup menu.

Making any changes. Click OK to put the new values into effect.

NOTE: Since read community, trap community, and write community settings are like passwords and are write-only fields, the current settings are displayed as asterisks.

Figure 34 SNMP Properties dialog

SNMP properties are divided into the following components:

SNMP configuration, page 77

SNMP trap configuration, page 77

76

Page 76
Image 76
HP SAN manual Snmp properties