NOTE: If the same user account exists on a switch and its RADIUS server, that user can login with either password, but the authority and account expiration will always come from the switch database.

Creating user accounts

A switch can have a maximum of 15 user accounts. To create a new user account on a switch:

1.Select Switch > User Accounts in the faceplate display to open the User Account Administration dialog.

2.Click the Add Account tab to open the Add Account tab page shown in Figure 18.

3.Enter an account name in the New Account Login field. Account names are limited to 15 characters.

4.Select the Admin Authority Enabled option if the account is to have the ability to modify switch configurations.

5.Enter a password in the New Password field and enter it again in the Verify Password field. A password must have a minimum of 8 characters and no more than 20.

6.Select the Permanent Account option if this account is to be permanent with no expiration date. Otherwise, select the Account Will Expire option and enter the number days in which the account will expire.

7.Click Add Account to add the newly defined account.

8.Click Close to close the User Account Administration dialog.

Figure 18 User Account Administration dialog – Add Account tab page

50

Page 50
Image 50
HP SAN manual Creating user accounts, User Account Administration dialog Add Account tab