Ratov | HP SAN specs

Table 8 Switch data window entries (Continued)

Entry	Description

SNMP Enabled	SNMP enabled or disabled.

Zones/Security

Interop Mode	Interoperability mode. Use Standard to connect to FC-SW-2
	compliant switches and McDATA switches in Open Fabric Mode. Use
	McDATA Fabric Mode to connect to McDATA switches in McDATA
	Fabric Mode. The default is Standard.

Legacy Address Format	Not applicable.

Interop Auto Save	Zoning auto save status. Saves zoning updates in temporary memory
	and the zoning database (True) or only in temporary memory (False).

Security Auto Save	Enable to automatically save security settings to permanent memory
	on the switch.

Security Fabric Binding Enable	If enabled, the expected domain ID of a switch is required before
	attaching to the fabric.

Zoning Default Visibility	Not applicable.

Default Zone	Disables communication between ports and devices not defined in
	the active zone set, or when there is no active zone set.

Discard Inactive	Automatically removes the previously active zone set when a zone set
	is activated on a switch.

Implicit Hard Zoning	Introduces hardware enforcement of zoning regardless of type. All
	zones and all supported zone member types will have hardware
	enforcement.

Advanced

R_A_TOV	Resource allocation timeout value

E_D_TOV	Error detect timeout value

Number of Donor Groups	Total number of donor port groups. A donor group is a set of ports
	on a switch that can donate buffer credits to each other.

Inactivity Timeout	Number of minutes the switch waits before terminating an idle
	command line interface session. Zero (0) disables the time out
	threshold.

Interop Mode	Interoperability mode. Use Standard to connect to FC-SW-2
	compliant switches and McDATA switches in Open Fabric Mode. Use
	McDATA Fabric Mode to connect to McDATA switches in McDATA
	Fabric Mode. The default is Standard.

Legacy Address Format	Not applicable.

In-band Enabled	In-band management status. Permits (True) or prevents (False) a
	switch from being managed over an ISL.

Principal Switch	If there is a domain ID conflict in the fabric, the switch with the
	highest principal priority, or the principal switch, will reassign any
	domain ID conflicts and establish the fabric.

239 Domain Support	239 domain support status. When enabled on every switch in the
	fabric, valid domain IDs are expanded to 1–239.

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 63

Image 63

HP SAN manual Ratov

Contents

McDATA 4Gb SAN Switch Page Contents Managing switches Glossary Index Managing ports Tables Intended audience PrerequisitesRelated documentation Jdom license Document conventions and symbols HP-authorized reseller HP technical support Helpful web sites Using McDATA Web Server/Element Manager Starting McDATA Web Server Workstation requirements Exiting McDATA Web Server or Element Manager Starting Element Manager in Hafm Setting preferences Enabling e-mail support Using online helpViewing software version and copyright information Enabling call home McDATA Web Server interface User interface Menu bar Shortcut keys Popup menus Graphic window McDATA Web Server Fabric tree Selecting switches Data windows and tabsSelecting ports Securing a fabric Security consistency checklist Remote authentication Connection securityUser account security Device security Edit Security dialog Create Security Group dialog Create Security Set dialog Create Security Group Member dialog McDATA 4Gb SAN Switch for HP p-Class BladeSystem user guide Viewing properties of a security set, group, or member Editing the security configuration on a switch Security Config dialog Archiving a security configuration to a fileActivating a security set Rediscovering a fabric Fabric services Events browser Displaying the event browser Sorting the event browser Saving the event browser to a file Filtering the event browser Devices data window Working with device information and nicknames Managing device port nicknames Displaying detailed device information Exporting nicknames to a file Creating a nicknameEditing a nickname Deleting a nickname Zoning a fabric Zoning conceptsZones Zoning database Zone sets Zoning limits and properties Editing the zoning database Managing the zoning database McDATA 4Gb SAN Switch for HP p-Class BladeSystem user guide Configuring the zoning database Saving the zoning database to a fileRestoring the zoning database from a file Restoring the default zoning database Managing the active zone setRemoving all zoning definitions Active zone set data window Displaying the configured and active zone sets Removing a zone set Creating a zone setActivating and deactivating a zone set Removing a zone from a zone set Creating a zone in a zone set Managing zones Adding zone members Renaming a zone or a zone setRemoving a zone member Zone merge failure recovery Merging fabrics and zoningZone merge failure Managing user accounts Managing switches Creating user accounts User Account Administration dialog Add Account tab Removing a user account User Account Administration Dialog Remove Account tab User Account Administration dialog Change Password tab Changing a user account password Modifying a user account User Account Administration dialog Modify Account tab Configuring Radius servers Adding a Radius server Removing a Radius server Editing Radius server information Modifying Radius server authentication order Displaying switch information Switch event logDevice and Host Bus Adapter information Switch data window Switch status and operational information McDATA 4Gb SAN Switch for HP p-Class BladeSystem user guide With a switch Ratov McDATA Web Server Configured Zonesets data window Port performance statisticsPort status and operational information Configuring port threshold alarms Setting the date/time and enabling NTP client Paging a switch Resetting a switch Switch properties Configuring a switch Domain ID and domain ID lock Syslog Symbolic name Switch administrative states Broadcast supportIn-band management Fabric Device Management Interface Advanced switch properties System services Timeout valuesInterop mode Page Network properties Snmp properties Snmp trap configuration Snmp configuration Switch binding Archiving a switch Restoring a switch Restoring the factory default configuration Downloading a support file Installing Product Feature Enablement keys Installing firmware Hardware status LEDs Displaying hardware status Port information data window Managing ports Persistent and will be lost on a switch reset VIEnable and LCFEnable features based on Port statistics data window LIP ALPD,ALPS Alps Port symbolic name Viewing and configuring ports Port states Port types Port speeds Port transceiver media statusDevice scan Resetting a port Testing portsPort binding Page Glossary FRU SFP 100 Index 102 System Fault LED 84 system services 104