Create Security Set dialog

Use the Create Security Set dialog shown in Figure 6 to create a new security set. There is a maximum of 4 security sets.

Figure 6 Create Security Set dialog

To add a security set from the faceplate display:

1.Click Security on the tool bar, or select Security > Edit Security to open the Edit Security dialog.

2.To open the Create a Security Set dialog, choose one of the following:

Click Security Set in the Edit Security dialog tool bar.

Right-click in the graphic window of the Edit Security dialog, and select New Security Set from the popup menu.

3.Enter a name for the new security set. The naming conventions for security sets are:

Must start with a letter.

All alphanumeric chars [aA—zZ] [0—9].

The symbols $_ - and ^ are the only symbols allowed.

4.Click OK to save the change.

Create Security Group dialog

Use the Create Security Group dialog, shown in Figure 7, to add a security group to a security set. To open the Create a Security Group dialog, choose one of the following:

Click Security Group in the Edit Security dialog tool bar.

Right-click in the graphic window of the Edit Security dialog, and select Create a Security Group from the popup menu.

Figure 7 Create Security Group dialog

The naming conventions for all security groups are listed below.

Must start with a letter

All alphanumeric chars [aA—zZ] [0—9]

The symbols $_ - and ^ are the only symbols allowed.

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 25

Page 25
Image 25
HP SAN manual Create Security Set dialog, Create Security Group dialog