The conventions for Port security group members are listed below:
•You can enter member World Wide Name (WWN), which must be 16 hex characters, or 23 characters with valid WWN format xx:xx:xx:xx:xx:xx:xx:xx.
•The authentication choices are None and CHAP.
•The Secret field is disabled if authentication is set to None. If authentication is CHAP, the Secret field is enabled. The secondary hash and secret are not supported when connecting to other McDATA products.
•Generate is only enabled when authentication is set to CHAP.
The conventions for MS security group members are listed below:
•You can enter member World Wide Name (WWN), which must be 16 hex characters, or 23 characters with valid WWN format xx:xx:xx:xx:xx:xx:xx:xx.
•The CT (common transport) authentication choices are None, MD5, and
•The Secret field is disabled if authentication is set to None, otherwise the Secret field enabled.
•Generate is only enabled when authentication is CHAP.
•Secret is 16 byte length for MD5 authentication, and 20 bytes if authentication is
To add a member to a security group:
1.Choose one of the following to open the Edit Security dialog from the faceplate display:
•Click Security on the tool bar.
•Select Security > Edit Security.
2.Choose one of the following to open the Create a Security Group Member dialog:
•Click a security group in the graphic window of the Edit Security dialog. Click Security Member in the tool bar.
•
3.Open the Group Member
4.Open the Authentication
•ISL authentication options are None (0 bytes), CHAP (16 bytes)
•MS
•Port authentication options are None (0 bytes), CHAP (16 bytes)
5.Enter an authentication password to be assigned that member in the Secret area. Or, click Generate to randomly generate a secret.
6.Enter the domain ID
7.Click OK to save the changes.
