Wireless-G Access Point
Wireless
You will use the Wireless tabs to enter a variety of wireless settings for the Access Point.
•Basic Wireless Settings. Enter the network mode, SSID, and other basic settings on this screen.
•Wireless Security. Use this screen to configure the Access Point’s wireless security settings.
•Wireless MAC Filter. From this screen, you can allow or block access to your wireless network.
•Advanced Wireless Settings. Configure the Access Point’s more advanced wireless settings.
Administration
You will use the Administration tabs to manage the Access Point.
•Management. This screen allows you to customize the password settings, as well as back up or restore the Access Point’s configuration file.
•SNMP. Configure the Simple Network Management Protocol (SNMP) settings on this screen.
•Log. Configure the Log settings for the Access Point on this screen.
•Factory Defaults. Use this screen to reset the Access Point to its factory default settings.
•Firmware Upgrade. Upgrade the Access Point’s firmware on this screen.
Status
You will be able to view status information for your local and wireless network.
•Local Network. This screen will display current information on the Access Point and its local network.
•Wireless Network. This screen will display current information on the Access Point and its wireless network.
Chapter 7: Configuring the
snmp: the standard
firmware: the programming code that runs a networking device.
37
Navigating the Utility
