Wireless-G Access Point

5.When the next screen appears, you will specify which users you will allow access to this protected network. Enter the E-mail Address, User Name, and Password (once in the Password field and again in the Confirm Password field) for each user. Then, click Add.

To remove a user from the list, select the user, and then click Remove.

Figure 5-30: Adding Authorized Users Screen

6.The Access Point is now configured for Linksys Wireless Guard. To finish configuring your wireless network, you will need to install the Linksys Wireless Guard client software for each PC that will have access. Click Main Menu, and then click Linksys Wireless Guard Client. (Refer to “Chapter 6: Using the Linksys Wireless Guard Service” for additional information.)

To add more Access Points to your Linksys Wireless Guard network, run the Linksys Wireless Guard

setup again for each Access Point.

Figure 5-31: Wireless Guard Congratulations Screen

Chapter 5: Setting up the Wireless-G Access Point

24

Using the Setup Wizard

Page 31
Image 31
Linksys WAP54G manual Wireless Guard Congratulations Screen