Wireless-G Access Point
The Administration - Log Tab
On this screen you can configure the log settings.
Management
You can have logs that keep track of the Access Point’s activities.
Log
To enable the Log support feature, select Enabled. Otherwise, select Disabled.
Logviewer IP Address. If you have chosen to monitor the Access Point’s traffic, then you can designate a PC that will receive permanent log files periodically. In the field provided, enter the IP address of this PC. To view these permanent logs, you must use Logviewer software, which can be downloaded free of charge from www.linksys.com.
View Log. To see a temporary log of the Access Point’s most recent activities, click this button.
On the View Log screen, click the First Page button to see the first page of log entries. Click the Last Page button to see the last page of log entries. Click the Previous Page button to see the previous page of log entries, and click the Next Page button to see the next page of log entries. To delete all log entries, click the Clear Log button. To update the log with the most recent activities, click the Refresh button.
Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Click Help for more information.
Chapter 7: Configuring the
Figure 7-23: Administration - Log Screen
Figure 7-24: View Log Screen
53
The Administration - Log Tab
