Linksys WAP54G manual Radius

Wireless-G Access Point

RADIUS

This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Access Point.)

RADIUS Server. Enter the RADIUS server’s IP address.

RADIUS Port. Enter the port number used by the RADIUS server.

Shared Secret. Enter the Shared Secret key used by the Access Point and RADIUS server.

Encryption. Select a level of WEP encryption, 40/64 bits (10 hex digits) or 128 bits (26 hex digits).

Passphrase. To generate WEP keys using a Passphrase, enter the Passphrase and click the Generate key.

Key 1-4. If you want to manually enter WEP keys, then complete the fields provided. Each WEP key can consist of the letters “A” through “F” and the numbers “0” through “9”. It should be 10 characters in length for 64-bit encryption or 26 characters in length for 128-bit encryption.

TX Key. Select which Key to use for data transmissions.

Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Click Help for more information.

WEP

Encryption. Select a level of WEP encryption, 40/64 bits (10 hex digits) or 128 bits (26 hex digits).

Passphrase. To generate WEP keys using a Passphrase, enter the Passphrase and click the Generate key.

Key 1-4. If you want to manually enter WEP keys, then complete the fields provided. Each WEP key can consist of the letters “A” through “F” and the numbers “0” through “9”. It should be 10 characters in length for 64-bit encryption or 26 characters in length for 128-bit encryption.

TX Key. Select which Key to use for data transmissions.

Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Click Help for more information.

Chapter 7: Configuring the Wireless-G Access Point

Figure 7-17: Wireless Security - RADIUS Screen

Figure 7-18: Wireless Security - WEP Screen

47

The Wireless - Wireless Security Tab