Linksys WAP54G manual Using the Linksys Wireless Guard Service, Client Software Installation

Wireless-G Access Point

Chapter 6: Using the Linksys Wireless Guard Service

This chapter is only for users who have signed up for Linksys Wireless Guard to secure their network and have configured the Access Point for Linksys Wireless Guard. (Refer to “Chapter 5: Setting up the Wireless-G Access Point.”)

You will now install the client software needed to securely connect a PC to the Access Point that is protected by Linksys Wireless Guard. This chapter will also show you how to access your protected network and manage your account.

NOTE: Make sure that you have signed up for Linksys Wireless Guard and that you have configured the Access Point for Linksys Wireless Guard before installing the client software.

Client Software Installation

1.If you haven’t already done so, on the Welcome screen of the Setup Wizard on the CD-ROM, click Linksys Wireless Guard Client. The screen in Figure 6-1 will appear. To install the software on this PC, click Continue. Click Cancel to cancel the installation.

Figure 6-1: Note

2.A screen will appear to notify you that the setup is in process. Wait until the next screen appears. If you want to end the installation process, click Cancel.

Figure 6-2: Configuring Windows Installer

Chapter 6: Using the Linksys Wireless Guard Service 25

Client Software Installation