Linksys WAP54G manual Manually Configuring the Access Point’s Wireless Settings

Models: WAP54G

1 84
Download 84 pages 56.89 Kb
Page 24
Image 24

Wireless-G Access Point

Manually Configuring the Access Point’s Wireless Settings

1. If you do not have other SecureEasySetup devices, then click the Enter Wireless Settings Manually button.

2.The Setup Wizard will ask you to enter the SSID, Channel, and Network Mode settings for your wireless network.

SSID - Enter the name of your wireless network. The SSID must be identical for all devices in the network. The default setting is linksys (all lowercase).

Channel - Select the operating channel for your wireless network. All of your wireless devices will use this channel to communicate.

Network Mode - Select the wireless standards running on your network. If you have both 802.11g and 802.11b devices in your network, keep the default setting, Mixed Mode. If you have only 802.11g devices, select G-Only. If you have only 802.11b devices, select B-Only. If you want to disable your wireless network, select Disable.

Click the Next button to continue or the Back button to return to the previous screen.

Chapter 5: Setting up the Wireless-G Access Point

Figure 5-17: Configure Wireless Settings Screen

Figure 5-18: Wireless Settings Screen

17

Using the Setup Wizard

Page 24
Image 24
Linksys WAP54G manual Manually Configuring the Access Point’s Wireless Settings, Configure Wireless Settings Screen