Wireless-G Access Point

Chapter 4: Connecting the Wireless-G Access Point

Overview

This chapter explains how to connect the Access Point for setup.

Connections for Setup

1.Connect your Ethernet network cable to your network router or switch. Then connect the other end of the network cable to the Access Point’s LAN (Ethernet network) port.

2.Connect the included power adapter to the Access Point’s Power port. Then plug the power adapter into an electrical outlet. The LEDs on the front panel will light up as soon as the Access Point’s powers on.

Proceed to “Chapter 5: Setting Up the Wireless-G Access Point.”

Figure 4-1: Connect the Ethernet Network Cable

Figure 4-2: Connect the Power

Chapter 4: Connecting the Wireless-G Access Point

8

Overview

Page 15
Image 15
Linksys WAP54G manual Connecting the Wireless-G Access Point, Overview, Connections for Setup