Wireless-G Access Point

3.Optimally, you should set up the Access Point using a PC on your wired network. Connect a network cable to your network router or switch. Then click the Next button.

Figure 5-2: Connect the Network Cable to the Router or

Switch Screen

4.The screen shows how the Access Point should be connected as you run the Setup Wizard. Connect the other end of the network cable to the Access Point’s Ethernet network port. Then click the Next button.

Figure 5-3: Connect the Network Cable to the Access

Point Screen

Chapter 5: Setting up the Wireless-G Access Point

10

Using the Setup Wizard

Page 17
Image 17
Linksys WAP54G manual Connect the Network Cable to the Router or Switch Screen