Wireless-G Access Point

The Administration - Management Tab

On this screen you can configure the password as well as back up or restore the Access Point’s configuration file.

Management

You should change the password that controls access to the Access Point’s Web-based Utility.

AP’s Password

Password. Create a Password for the Access Point’s Web-based Utility.

Re-enter to Confirm. To confirm the new Password, enter it again in this field.

Backup and Restore

On this screen you can create a backup configuration file or save a configuration file to the Access Point.

Backup Settings. To save a backup configuration file on a computer, click the Backup Settings button and follow the on-screen instructions.

Restore Settings. To upload a configuration file to the Access Point, click the Restore Settings button and follow the on-screen instructions.

Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Click Help for more information.

Chapter 7: Configuring the Wireless-G Access Point

Figure 7-21: Administration - Management Screen

51

The Administration - Management Tab

Page 58
Image 58
Linksys WAP54G manual Administration Management Tab, AP’s Password, Backup and Restore