Installing or Upgrading NetWare Client Software
Running the NetWare Client Installation Program
1 Select the directory path field in Step 1 on the installation program opening screen and press <Enter>.
A blinking cursor appears at the end of the path statement in the field.
2 Edit the field for your specific target directory and press <Enter>.
The installation program automatically jumps to Step 2 on the screen (which is explained in the procedure).
Updating System Files on Your Workstation
To allow for changes to be made to your AUTOEXEC.BAT and
CONFIG.SYS files, follow these steps:
1 Select the “Allow Changes? (Y/N)” field in Step 2 on the installation program
| opening screen and press <Enter>. |
| A blinking cursor appears at the end of the path statement in the field. |
| 2 To continue type “Y” or “N” and then press <Enter>. |
| The installation program automatically jumps to Step 3 on the screen. . |
| If you allow for changes, the original system files are saved as |
| AUTOEXEC.BNW and CONFIG.BNW. |
| If you do not allow for automatic changes to these files during installation, a |
| copy of the necessary changes is saved to the destination directory (NetWare |
| Client directory). The files are named CONFIG.NEW and AUTOEXEC.NEW. |
| You will be required to make these changes manually after the installation. (See |
| “Creating or Modifying Configuration Files” for more information.) |
|
|
NOTE: | If previous versions of CONFIG.NEW and AUTOEXEC.NEW exist, the installation |
| program overwrites them with the newer information. |
| You are prompted before any system files set as |
| choose not to write over the |
| files as CONFIG.NEW and AUTOEXEC.NEW files. If these .NEW files already |
| exist and are set as |
| any file. |
| Changes Made to Your AUTOEXEC.BAT File |
| |
| Your path statement is modified to add the NetWare Client directory and a |
| line is added to call the |