HP UX 11i v1 Networking Software manual Wsupgrd NE2000 /N

Using the WSUPGRD Utility

Using WSUPGRDE to Upgrade Network Board Drivers

WSUPGRD NE2000 /N

This command upgrades your IPX LAN driver with an NE2000.COM ODI LAN driver without deleting your IPX LAN driver.

7To exit the system login script, press <Esc>.

8Confirm and save changes you made in the login script.

9Modify any batch files used to load the NetWare Client software for each client workstation.

The batch file should contain at least the following lines:

LSL

odi_lan_driver.COM

IPXODI

NETx [if using NetWare 3 or earlier] VLM [if using NetWare 4]

10Log in all of the client workstations you have modified the login scripts for. If the workstations are already logged in, log them in to the network again.

11Run the WSUPGRD program and update the LAN driver.

Using NetWare Administrator

This utility is used only with NetWare 4 networks.

For NetWare 2 and NetWare 3 networks, use the SYSCON utility to edit your login script. See “Using SYSCON” for information.

Prerequisites

•A client workstation logged in to the network, running a copy of MS Windows

3.1or later and Novell DOS 7 or later, DR DOS 5 or later, MS-DOS 3 or later, or PC-DOS 3 or later

•Rights to modify a system login script

•A search drive mapped to SYS:PUBLIC

Procedure

1Load the NetWare Client software and then start MS Windows.

2Load the NetWare User Tools by choosing the “NetWare User Tools” icon from the NetWare group.

B-8