Installing or Upgrading NetWare Client Software
Installing for MS Windows for Workgroups
“Networking functionality will not be available. Your network adapter or protocols may not be configured properly. Run Network Setup to check adapter and protocol settings.”
2To continue, choose “OK.”
3In the “Network” group, choose the “Network Setup” icon.
4From the “Network Setup” dialog box, choose “Drivers.”
The “Network Drivers” dialog box appears. MS Windows for Workgroups requires you to select a LAN driver compatible with ODI for your network board.
a Remove any existing LAN drivers from the dialog box by selecting a LAN driver and choosing “Remove.”
When prompted to make sure you want to remove the selected LAN drivers, choose “Yes.”
bChoose “Add Adapter.”
cFrom the “Add Network Adapter” dialog box, select the appropriate ODI LAN driver for your network board.
The Setup program might prompt you to direct it to the location of the correct ODI LAN driver. The correct LAN driver should exist in the NetWare Client directory you selected during installation of the NetWare Client software.
dSetup the appropriate frame type for your network.
The NWLINK.386 file is a
Software such as the RCONSOLE utility and other utilities that run in an MS Windows DOS box might fail if the frame type setting is incorrect for your network.
To change the default frame type for the NWLINK.386 file, select “IPX/SPX Compatible Transport” or “IPX/SPX Compatible Transport with NetBIOS,” and then choose “Setup.” Then, select “Frame Type” and change the value to the desired frame type.
eExit the “Network Drivers” dialog box, by choosing “OK” and then “Exit.” Your NetWare Client software installation is now completed.