Configuring Client Workstations for Desktop SNMP Services
Installing the Desktop SNMP Software
Manually
If you choose to not run the NetWare Client installation program, you must manually copy the appropriate files to the NetWare Client directory.
To manually copy the files from the NetWare Client for DOS and MS Windows diskettes, complete the following procedure.
Procedure
1Expand and copy the following files from the NetWare Client for DOS and MS Windows Disk 2 to the NetWare Client directory (the default is C:\NWCLIENT).
HRMIB.EXE | HRMIB.INI |
|
|
MIB2IF.VLM | MIB2PROT.VLM |
|
|
STPIPX.COM | STPUDP.COM |
|
|
WSASN1.VLM | WSDRVPRN.MIB |
|
|
WSDRVPRN.VLM | WSREG.VLM |
|
|
WSSNMP.VLM | WSTRAP.VLM |
|
|
To expand a file, type |
|
NWUNPACK source_drive:path\filename destination_drive:path\filename <Enter>
For example, to expand the WSSNMP.VLM file, you could type
NWUNPACK A:WSSNMP.VL_ C:\NWCLIENT\WSSNMP.VLM <Enter>
2Repeat Step 1 until all the Desktop SNMP and NetWare Client files exist in the NetWare Client directory.