Setting Up Client Workstation Printing
Using NetWare Utilities to Set Up Network Printing
2Add the following lines to the file:
NetWare DOS Requester network printers = number
Replace number with the number of printer connections. Maximum = 9
Default = 3
For example, to allow for the maximum number of printer connections, you would type
NetWare DOS Requester network printers = 9
3Save your changes and exit the ASCII text editor.
The NetWare User Tools for DOS (the NETUSER Utility)
NETUSER allows you to assign LPT ports to network printers and queues.
Use NETUSER to
•Set up print queues
•Control network printing
•View information about network printing
•Redirect a printer port to the network
The NETUSER utility is a NetWare workstation utility located in the
SYS:PUBLIC directory. A default drive mapping should exist for the
SYS:PUBLIC directory (the default is drive Z:).
NOTE:The NETUSER utility is available in NetWare 4 networks only.
Specify the port assignment you want by completing the following procedure.
Procedure
1Change to the SYS:PUBLIC directory.
2Load NetWare User Tools for DOS by typing