Setting Up Source Routing Support for a Token-Ring Network

Loading the Source Routing Driver

Loading the Source Routing Driver

Loading the ROUTE.COM file requires you to complete the following procedure.

Procedure

1Ensure that the ROUTE.COM and NetWare Client software files are installed on each client workstation that you want to connect to a token-ring network.

See “Installing the ROUTE.COM and NetWare Client Files” for more information.

2Ensure that all necessary modifications are made to the client workstation configuration files.

See “Modifying the DOS System and NetWare Client Configuration Files” for more information.

3Reboot each client workstation.

The STARTNET.BAT file loads the ROUTE.COM and NetWare Client software files.

10-12