| Installing or Upgrading NetWare Client Software |
| Using Two Network Boards |
|
|
NOTE: | Include the line for MS Windows directory only if you are running MS Windows for |
| Workgroup. |
| Replace preferred_language with one of the following languages: |
| |
| ENGLISH |
| DEUTSCH |
| ESPANOL |
| FRANCAIS |
| ITALIANO |
| Replace client directory with the directory where the NetWare Client files |
| are found. |
| Replace primary_lan_driver with name of the ODI LAN driver that your |
| workstation binds to first. |
| Replace secondary_lan_driver with name of the ODI LAN driver that your |
| workstation binds to second. |
| Replace MS Windows directory with the directory where the MS Windows |
| for Workgroup files are found. |
| NET.CFG |
| Two Different Drivers |
| If you have two network boards using different types of ODI LAN drivers, |
| you must load the LAN drivers separately by adding a Link Driver section |
| for each network board. |
| For example, if you have and NE2000 network board (the primary board) |
| and a token ring network board, you might include the following lines in the |
| NET.CFG file: |
| link driver ne2000 |
| int 5 |
| port 360 |
| frame ethernet_802.2 |
| frame ethernet_802.3 |