Configuring Client Workstations for Desktop SNMP Services
Unloading the Desktop SNMP Software
Unloading the Desktop SNMP Software
1(Conditional) If UDP/IP support has been loaded, unload STPUDP by typing
STPUDP /U <Enter>
2(Conditional) If IPX support has been loaded, unload STPIPX by typing
STPIPX /U <Enter>
3Unload all VLM files by typing
VLM /U <Enter>
The VLM /U command unloads all VLM files, not just the Desktop SNMP files.
NOTE:Always unload the modules in reverse order from the order in which you loaded them. Unloading the modules in any order other than reverse order is impossible.