Configuring Client Workstations for Desktop SNMP Services
Loading the Desktop SNMP Software
Loading the Desktop SNMP Software
Loading the Desktop SNMP software requires you to complete the following procedure.
Procedure
1Ensure that the SNMP management system is set up and running.
See “Installing an SNMP Management System Console” for more information.
2Ensure that the Desktop SNMP software is installed on each client workstation that you want managed from the management console.
See “Installing the Desktop SNMP Software” for more information.
3Ensure that all necessary modifications are made to the client workstation configuration files.
See “Modifying DOS System and NetWare Client Configuration Files” for more information.
4Ensure that the HRMIB.INI is configured properly for each client workstation to include the necessary devices you want managed.
See “Configuring the HRMIB.INI File” for more information.
5Reboot each client workstation.
The VLM manager loads the Desktop SNMP .VLM files along with any other
.VLM files your client workstations are configured to load.