HTC TRIN100 user manual 196, To close a program, To perform a soft reset, Using Clear Storage

12

Managing Your Device

To close a program

Tapping the button in a program may just close the program screen. In this case, the program continues to run in the background. You can end running programs manually by following these steps:

1.Tap Start > Settings > System tab > Memory > Running Programs tab.

2.In the Running Programs List, tap the program you want to close, and tap Stop.

12.4Resetting Your Device

Occasionally, you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.

To perform a soft reset

• Use the stylus to press the Reset Reset button

button found on the bottom side of your device. Your device restarts and displays the Today screen.

Using Clear Storage

Clear Storage lets you clear all storage data and reset all seetings back to manufacturer's default settings.

Warning: You will lose all your data when you use Clear Storage.

You can use Clear Storage by following these steps:

1.Tap Start > Settings > System tab, then tap Clear Storage.

2.Entering 1234, then tap Yes.

196

Ch12_English_Manual.indd 196 2007/6/8 上午 12:24: