Removing an LC-LC fibre-channel cable
Complete the following steps to remove an
Attention: To avoid damaging the
vPress and hold the lever to release the latches before you remove the cable from the SFP module.
vEnsure that the levers are in the released position when you remove the cable.
vDo not grasp the SFP module plastic tab when you remove the cable.
1.On the end of the
Lever
Latches
Figure 41. LC-LC fibre-channel cable lever and latches
2.While pressing down the cable lever, carefully pull on the connector to remove the cable from the SFP module, as shown in Figure 42.
Figure 42. Removing the LC-LC fibre-channel cable
3.Replace the protective caps on the cable ends.
4.Replace the protective cap on the SFP module.
Using LC-SC fibre-channel cable adapters
The
v
vFibre channel host bus adapter
Attention: The DS4700 Express does not support the attachment of storage expansion enclosures that operate at 1 Gbps, such as the EXP500.
64IBM System Storage DS4700 Express Storage Subsystem: Installation, User’s and Maintenance Guide
