122
Chapter 13
Figure 13-30
Sampling Wizard, Finish step
ESelect Pastethe syntax generated by the Wizard into a syntax window.
EClick Finish.
The following syntax is generated:
* Sampling Wizard.
CSSELECT
/PLAN FILE='demo.csplan'
/CRITERIA STAGES = 3 SEED = 4231946
/CLASSMISSING EXCLUDE
/DATA RENAMEVARS
/PRINT SELECTION.
Printing the samplingsummary in this case produces a cumbersome table that causes problems in
the OutputViewer. To turn off display of the sampling summary, replace SELECTION with CPS in
the PRINT subcommand. Then run the syntax within the syntax window.
These selectionsdraw a sample according to the third stage of the demo.csplan sampling plan.