Integra DTR-7.4 Digital IN/OUT, PRE OUT 18, 25, Antenna, Zone 2 OUT, Ir In/Out, Ethernet Net-Tune

Index Parts and Facilities—Continued

For more information regarding connection procedures, see pages indicated in brackets [ ].

1DIGITAL IN/OUT [21-24]

These jacks are for connecting components with digital input and output capabilities. To connect a CD player, see page 23; to connect an MD or CD recorder, see page 24; to connect a DAT deck, see page 24; to connect a DVD player, see page 21; to connect a DVD recorder, see page 22; and to con- nect a digital satellite tuner, see page 22.

2PRE OUT [18, 25, 66]

To use the DTR-7.4 as a preamplifier, connect a power amplifier to this jack.

3ANTENNA [14]

These jacks are for connecting the FM indoor antenna and the AM loop antenna that are supplied with the DTR-7.4.

4ZONE 2 OUT [66]

This jack is for connecting the component that will be used in the remote zone (Zone 2).

5MONITOR OUT VIDEO/S VIDEO [20]

connect a DVD recorder, see page 22; and to con- nect a digital satellite tuner, see page 22.

DRS 232

This port is for connecting the DTR-7.4 to home automation and external controllers.

EIR IN/OUT [69]

These connectors are for connecting the remote sen- sor of a multi-room kit (sold separately).

F12V TRIGGER OUT ZONE 2 A/B [71]

These connectors are used to connect to the 12V TRIGGER IN terminal of a component.

G [26]

This jack is for connecting other Integra/Onkyo components equipped with the same terminal. The audio connection cables must also be con- nected.

HAC INLET [27]

This connector is for connecting the supplied power cord.

and Connections

These jacks are for connecting to the video input jacks on television monitors or projectors.

6COMPONENT VIDEO OUTPUT [20]

These jacks are for connecting to the component video input jacks on television monitors or projectors.

7ETHERNET (Net-Tune) [73]

This connector is for connecting to an Ethernet network.

8SPEAKERS [18, 66]

These terminals are for connecting the speakers.

9AC OUTLETS [24]

This AC outlet is provided to plug in the power cord from another component. The shape and number of the AC outlet depend on the shipping destination.

0MULTI CH INPUT [64]

This connector is for connecting components with a multichannel output.

APHONO/CD/TAPE AUDIO IN/OUT [23, 24]

These connectors are for connecting to the audio input and output jacks on audio components. To connect a turntable, see page 23; to connect a CD player, see page 23; and to connect a cassette tape deck, MD recorder, or CD recorder, see page 24.

BDVD/VIDEO1-4 IN/OUT [21, 22]

These connectors are for connecting to the video input and output jacks on video components. To connect a DVD player, see page 21; to connect a DVD recorder, see page 22; to connect a VCR, see page 21; and to connect a digital satellite tuner, see page 22.

CCOMPONENT VIDEO INPUT1/2 [21, 22]

These connectors are for connecting to the compo- nent video outputs of video components that have them. To connect a DVD player, see page 21; to

Facilities

11