Integra DTR-7.4 instruction manual Remote Controller

Remote Controller—Continued

FTest Tone, CH SEL, Level– & Level+ buttons [35]

These buttons are used to adjust the level of each speaker individually. These functions can be set only with the remote controller. The Level– and Level+ buttons are also used to adjust the volume in Zone 2.

GAudio SEL button [43]

TRe-EQ button [55]

This button is used to turn on and off the Re-EQ function.

UL Night button [55]

This button is used to set the Late Night function.

This button is used to select the audio input signal format: analog, digital, or multichannel.

HLIGHT button

This button is used to turn on or off the remote con- troller’s illuminated buttons.

IDirect Tuning button [48]

This button is used with the number buttons to select a radio station by entering its frequency. Press this button first, and then use the number buttons to enter the frequency.

JDisplay

The top line of this LCD display shows the name of the currently selected input source. The bottom line shows the currently selected remote controller mode.

KZone 2 button [68]

This button is used when you want to set the volume and input source for Zone 2.

LInput button [40]

This button is used to select the input source. Press this button first, and then roll the scroll wheel until the name of the input source appears on the display.

MSleep button [41]

This button is used to set the Sleep function. This function can be set only with the remote controller.

NVOL button [40, 65]

This button is used to set the volume of the DTR-7.4.

OSetup/Guide button [29]

This button is used to access the onscreen setup menus (OSD) that appear on the TV.

PMuting button [40]

This button is used to mute the DTR-7.4. This func- tion can be set only with the remote controller.

QAll CH ST button [47]

This button is used to select the All Ch Stereo listen- ing mode.

RStereo button [46]

This button is used to select the Stereo listening mode.

S DSP/DSP buttons [47]

These buttons are used to select the DSP (digital signal processor) listening modes.

Facilities and Connections

13