Integra DTR-7.4 instruction manual Your

Configuring Input Settings Suitable for Your Connections—Continued

The default settings are given below.

Input source selected	Component video input
CD	Last Valid
		7.4-
PHONO	Last Valid
TUNER	Last Valid	DTR
TAPE	Last Valid
DVD	INPUT 1	Your
VIDEO 1	INPUT 2
		Up
VIDEO 2	INPUT 2
VIDEO 3	INPUT 2
		Setting
VIDEO 4	INPUT 2
VIDEO 5	INPUT 2
NET AUDIO	Last Valid

For example, when you connect the DVD player to the COMPONENT VIDEO INPUT 2 jacks, select “DVD” as input source and set “b. Component Video” to “INPUT 2.”

Available component video inputs are “INPUT 1,” “INPUT 2,” “VIDEO,” “Last Valid,” and “None.” INPUT 1: The video signals from devices connected to the INPUT 1 of the COMPONENT VIDEO input banks are used.

INPUT 2: The video signals from devices connected to the INPUT 2 of the COMPONENT VIDEO input banks are used.

VIDEO: The video signals assigned in the “a. Video” sub-menu setting are used. This option is useful when no devices are connected to the INPUT 1 and INPUT 2 of the COMPONENT VIDEO input banks.

Last Valid (enables the source last selected): Select to have the video of the previous input source continued. None: No video signals are assigned. When you select “None,” the OSD screen disappears. If you want to change this setting later on, use the front panel display on the DTR-7.4.

39