Integra DTR-7.4 instruction manual THX Changes the listening mode to the THX listening mode

Using the Listening Modes—Continued

THX: Changes the listening mode to the THX listening mode.

If the THX button is pressed

•While playing back Dolby Digital sources Switches the THX Surround EX mode (Auto → On

→Off) if the source is a THX Surround EX-compat- ible source. For details, see “c. THX Surround EX (Dolby D)” on page 61.

•While playing back Analog/PCM sources Switches the decoding mode (Pro Logic II Movie → DTS Neo6:Cinema) for THX processing. For details, see “b. Decoder (2ch)” on page 61.

•While playing back DTS sources

Switches the DTS-ES mode from Auto → On → Off. Changing the DTS-ES mode allows you to enjoy the DTS THX Cinema, DTS-ES Discrete THX Cinema, and DTS-ES Matrix THX Cinema surround systems. For details, see “d. DTS-ES” on page 61.

Be aware that if surround back speakers are not con- nected, or if the Surr Back/Zone 2 setting of the Surr

Relationship between input source and listening mode

Back/Zone 2 Sub-menu is set to “Zone 2,” the THX Sur- round EX, DTS-ES Discrete, or DTS-ES Matrix listen- ing modes cannot be selected.

DSP / : Changes the digital processing mode that is currently being input from the selected input source as shown below.

Mono, Theater-Dimensional, Mono Movie, Enhance, Orchestra, Unplugged, Studio-Mix, TV Logic, All Ch Stereo, Mono.

The digital processing modes available depend on the selected input source.

All CH ST (remote controller only): Changes to All Ch Stereo the listening mode for the input signal of the input source currently selected. If pressed, the corresponding setting in the Listening Mode Preset Sub-menu of the Setup Menu for the selected input source is also changed (See pages 56-57).

On the DTR-7.4, use the DSP button for enabling the All Ch Stereo listening mode.

Enjoying Music and Movies

Listening modes marked with the “✔” can be selected. For columns that list a number of listening modes, the display will correspond to the format of the signal from the source media.

Input source signal (display)		Analog/PCM (2ch)	PCM fs= 96k	Dolby Digital	DTS	Digital Format	Digital Format
			(2ch)	(3ch-5.1ch)	(5.1ch, 6.1ch)	(DD/DTS) (2ch)	(Monaural)
	Type of software	Tape, Video tape,	DVD	DVD,	CD, LD,	DVD,	DVD
		Vinyl, Tuner, CD,	(96kHz/	Digital Satellite	DVD	Digital Satellite
		MD, DVD (Stereo),	24bit)
Button/Listening Mode		LD, Digital Satellite
Pure A*1	Pure Audio	✔	✔
Direct*1	Direct	✔	✔
Stereo	Stereo	✔	✔	✔	✔	✔
	PLII Movie	✔	✔			✔
	PLII Music	✔	✔			✔
	DTS Neo:6 Cinema	✔				✔
	DTS Neo:6 Music	✔				✔
Surround
	Dolby Digital			✔
	Dolby Digital EX*2			✔
	DTS				✔
	DTS 96/24				✔*3
	DTS-ES Descrete*2				✔*4
	DTS-ES Matrix*2/				✔*5
	DTS-ES + Neo:6
THX	THX Cinema	✔		✔	✔	✔
	THX Surround EX*2			✔
	Mono	✔				✔	✔
	Theater-Dimensional	✔		✔	✔	✔
	Mono Movie	✔				✔	✔
DSP	Enhance	✔		✔	✔	✔
	Orchestra	✔		✔	✔	✔
	Unplugged	✔		✔	✔	✔
	Studio-Mix	✔		✔	✔	✔
	TV Logic	✔		✔	✔	✔
	ALL Ch Stereo	✔				✔

*1 On the DTR-7.4, use the Direct/Pure Audio button for selecting these listening modes.

*2 Available only when the surround back speakers are connected to the DTR-7.4.

*3 Available only when the input source is encoded in the DTS 96/24 format.

*4 Available only when the input source is encoded in the DTS-ES Discrete format.

*5 The DTS-ES Matrix listening mode is enabled when the input source is encoded in the DTS-ES Matrix format. When the input source is in DTS format but other than 6.1ch, and the surround setting for “DTS-ES” is set to “On,” the DTS-ES+Neo:6 listening mode is enabled.

47