Integra DTR-7.4 Connecting a Compact Disc Player CD, Connecting Video Camera, etc. Video 5 Input

Connecting to Audio/Video Equipment—Continued

When hooking up a TV with audio outputs, make sure the TV’s audio output setting. You might have to go through the TV’s menu and set the TV Fixed audio output and then internal speakers off.

If the device has a digital output, connect it to either the DIGITAL IN COAX jack or DIGITAL IN OPT jack of the DTR-7.4, depending on the type of connector on the device.

On the initial settings of the DTR-7.4, the VIDEO 3 input source is set for digital input at the OPT 3 jack.

If the digital connection is made at a different jack, this must be changed at Setup Menu → Input Setup → Digital Setup (See page 36).

On the initial settings of the DTR-7.4, the VIDEO 4 input source is not set for digital input. If you are connecting a digital component, these settings must be changed at Setup Menu → Input Setup → Digital Setup (See page 36).

Connecting a Compact Disc Player (CD)

DIGITAL

PRE OUT

ANTENNA

AUDIO

VIDEO

S VIDEO

COMPONENT

IN

R

L

VIDEO

COAX

FRONT

MONITOR

OUTPUT

1

OUT

Y

R

L

2

SUB

CENTER

AM

OUT

ZONE 2

PB

SURR

AUDIO

3

SURR

PR

IN

DVD

DIGITAL

OPT

BACK/

R

L

ROUT

L

INPUT 1

ZONE 2

75

1

Y

FM

IN

VIDEO 1

CD

2

FRONT

MULTI CH

IN

PB

OPT

SUB

INPUT

AUDIO

CENTER

R

L

IN

R

L

3

PHONO

OUT

PR

1

IN

VIDEO 2

INPUT 2

SURR

DIGITAL

CD

IN

Y

IN

OUT

R

L

OPT

OUT

1

IN

VIDEO 3

PB

SURR

BACK

TAPE

2

IN

VIDEO 4

PR

GND

IN

L

R

L

R

AUDIO AUDIO VIDEO S VIDEO

AUDIO OUT

DIGITAL	R	L
OUT
OPT

CD player

Connections

Connecting Video Camera, etc. (Video 5 Input)

Using an RCA video connection cable, connect the video output jack (composite) of the device to the Video 5 Video jack of the DTR-7.4. Or if the device has an S video output jack, connect it to the Video 5 S Video jack of the DTR-7.4 using an S video connection cable. Using an RCA audio connection cable, connect the audio output jack of the device to the Video 5 Audio jacks of the DTR-7.4. Make sure that you properly connect the left channel to the L jack and the right channel to the R jack.

If the device has an optical digital output, connect it to the Video 5 Digital jack of the DTR-7.4.

Using an RCA audio connection cable, connect the output jacks of the compact disc player to the CD AUDIO jacks of the DTR-7.4. Make sure that you properly connect the left channel to the L jack and the right channel to the R jack.

If the compact disc player has a digital output, connect it to either the DIGITAL IN COAX jack or DIGITAL IN OPT jack of the DTR-7.4, depending on the type of connector on the compact disc player.

On the initial settings of the DTR-7.4, the CD input source is set for digital input at the OPT 1 jack.

If the digital connection is made to a different jack, this must be changed at Setup Menu → Input Setup → Dig- ital Setup (See page 36).

Facilities and

The Video 5 digital input is fixed to the OPTICAL input on the front panel.

. Connecting a Turntable (PHONO)

S VIDEO	DIGITAL
OUT	OUT

Video camera/ Video game (Video 5 Input)

AUDIO OUT		VIDEO
R	L	OUT

		Front panel
	Video 5 Input
Digital	S Video	Video	L Audio R

DTR-7.4

DIGITAL	PRE OUT			ANTENNA		AUDIO	VIDEO	S VIDEO	COMPONENT
IN	R	L					AUDIO			VIDEO
COAX	FRONT									Y
								M NIT R		OUTPUT
1								OUT
	SUB		CENTER			R	L R	L
2						AM	OUT	ZONE 2		PB
	SURR							PHONO
3							IN	DVD	IN	PR
	BACK/ R	L
	SURR
OPT	ZONE 2					FM				INPUT 1
1						75	OUT			Y
								VIDEO 1
2	FRONT		MULTI CH				IN			PB
	R		INPUT	AUDIO
			L	R	L
	SUB		CENTER
3						PHONO	OUT			PR
						IN		VIDEO 2
										INPUT 2
	SURR
DIGITAL						CD	IN			Y
						IN
OUT	R	L
OPT						OUT
1							IN	VIDEO 3		PB
	SURR
	BACK					TAPE
2							IN	VIDEO 4		PR
	GND					IN	L
				R	L	R		S VIDEO
				AUDIO		AUDIO	VIDEO

Ground wire (earth)

Using an RCA audio connection cable, connect the output jacks of the turntable to the PHONO audio jacks of the DTR-7.4. Make sure that you properly connect the

LL

RR

left channel to the L jack and the right channel to the R jack.

Note:

The DTR-7.4 is designed for use with moving magnet cartridges. For proper operation, connect a ground (or earth) wire to the GND terminal. For some turntables, however, connecting the ground wire may cause increased noise, and in such a case, a ground wire is not necessary and should not be connected.

23