Integra DTR-7.4 Preference Advanced—Continued, Setting the Background Color for OSD OSD Setup

Preference (Advanced)—Continued

Adjusting the Headphone Volume Level (Headphones Level)

If you notice a large difference in the volume when listening with the headphones than when listening to the speakers, you can change the headphone volume level so that you do not have to make adjustments with the main volume dial each time you put on the headphones.

The headphone volume can be adjusted between –12 and +12 decibels.

4-2.HeadphoneLevel
a.Headphones Level
:	0dB
Quit:[SETUP]

Setting the Background Color for OSD (OSD Setup)

This sub-menu allows you to customize the OSD Setup Menu to display in the manner you desire.

4-3.OSD Setup

a.Background Color

:Blue1

b.Component Video

:OSD On

c.Immediate Display

:On

d.Display Position

:Bottom

Quit:[SETUP]

a. Background Color

Select either Blue1, Blue2, Green1, Green2, Magenta, Red1, or Red2 as the background color when the OSD Setup Menu is displayed.

b. Component Video

You can select whether the OSD signal is output to the TV monitor connected to the COMPONENT VIDEO connectors or not.

OSD On: The OSD signal is output.

OSD Off: The OSD signal is not output.

c. Immediate Display

On: Select to have the screen immediately display certain operations as you perform them (e.g., having the input source displayed whenever an input source selector button is pressed). The display will remain for five seconds after the operation is completed. Off: Select to turn off the immediate display of oper- ations.

d. Display Position

Use this setting to select the position of the immediate display that appears when certain operations are performed. You can position the immediate display at any of ten different levels ranging from the top all the way to the bottom.

Switching the OSD Position

(OSD Position)

This sub-menu allows you to adjust the position of the OSD Setup Menu as it is displayed on your screen. Depending on the monitor used, there may be cases where the OSD Setup Menu is not displayed in the center and parts of the menus are cut off. To adjust the position of the OSD Setup Menu, simply press the cursor buttons to inch the menu to the position you desire.

4-4.OSD Position	(Advanced)
Exit:[RETURN]
	Useful Settings

VIDEO 1

63