Configuring Input Settings Suitable for Your Connections—Continued

Multichannel Setup Sub-menu (When NET AUDIO

is not selected as the input source)

When any input source other than Net Audio is selected, this sub-menu appears and allows you to set the multi- channel input setting.

The setting in this sub-menu is normally set to “No,” and only needs to be changed to “Yes” if a DVD player, MPEG decoder, or other component that has a multi- channel port is connected to the MULTI CH INPUT port for 5.1 channel, 6.1 channel, or 7.1 channel audio. The default setting for “DVD” is set to “Yes” and the one for other input sources is set to “No.” When the ana- log output from a DVD player is not connected to the MULTI CH INPUT port, change this setting to “No.” For details on the device connection and setting proce- dures, see “Enjoying analog multichannel audio play- back” on page 64.

2-2.Multichannel Setup

Input:DVD

a.Multichannel :Yes

 

 

Quit:[SETUP]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input source selected

Multichannel

 

 

 

 

 

CD

 

No

 

 

 

 

 

PHONO

 

No

 

 

 

 

 

TUNER

 

No

 

 

 

 

 

TAPE

 

No

 

 

 

 

 

DVD

 

Yes

 

 

 

 

 

VIDEO 1

 

No

 

 

 

 

 

VIDEO 2

 

No

 

 

 

 

 

VIDEO 3

 

No

 

 

 

 

 

VIDEO 4

 

No

 

 

 

 

 

VIDEO 5

 

No

 

 

 

 

 

Video Setup Sub-menu

When the default input settings does not suit your con- nection, perform the following procedures to configure your input settings.

2-3.Video Setup

Input:DVD

a.Video

:DVD

b.Component Video :INPUT1

Quit:[SETUP]

a. Video

This setting allows you to match the audio from one component with the video from another. Therefore, you can set a video source to be displayed while the audio from another input source is heard. For example, this allows you to play the music from a compact disc, while displaying the picture from a video cassette player or other video source.

The default settings are given below.

Input source selected

Video

 

 

CD

Last Valid

 

 

PHONO

Last Valid

 

 

TUNER

Last Valid

 

 

TAPE

Last Valid

 

 

DVD

DVD

 

 

VIDEO 1

VIDEO 1

 

 

VIDEO 2

VIDEO 2

 

 

VIDEO 3

VIDEO 3

 

 

VIDEO 4

VIDEO 4

 

 

VIDEO 5

VIDEO 5

 

 

NET AUDIO

Last Valid

 

 

The settings in this sub-menu apply to the video and S video signals. Available options for the video source to be displayed are “DVD,” “VIDEO 1” to “VIDEO 5,” “Last Valid” and “----.”

DVD, VIDEO 1-5:Select either the video signal from the VIDEO or S VIDEO terminal for each video input. Last Valid: Select to have the video of the previous input source continued. For example, if the selected input source is VIDEO 1, and you then change to CD (set to “Last Valid”), then the audio from the CD input is played while the video from VIDEO 1 continues.

----:Set this option when you do not want any video

inputs to be displayed.

b. Component Video

Use this setting if you connect monitors like TV to the COMPONENT VIDEO OUTPUT jacks on the DTR-7.4.

38

Page 38
Image 38
Integra DTR-7.4 instruction manual Multichannel Setup Sub-menu When NET Audio, Video Setup Sub-menu, Component Video