Integra DTR-7.4 Configuring the 12V Trigger Terminal, When the “Basic Menu” is displayed, select

Using an External Device with 12V Trigger Terminal

Connecting to an External Device with 12V TRIGGER Terminal

DTR-7.4

A	ZONE 2
	12V
	TRIGGER OUT

B

12V TRIGGER

Device A

12V TRIGGER

Device B

12V TRIGGER

The device located in the Zone 2

These outputs can be connected to the 12-volt trigger inputs on other components. They output 12 volts (100 milliamperes max). The ZONE 2 TRIGGER OUT out- puts 12 volts while the DTR-7.4 is in Zone 2 mode. The A and B outputs can be assigned to input sources, in which case, the assigned trigger output outputs 12 volts while the input source is selected.

Configuring the 12V Trigger Terminal

1	Press the Input button, and then roll the
	scroll wheel to select the input source you
	want to set.
2	Press the scroll wheel, and then press the
	Setup button.
	When the “Basic Menu” is displayed, select
	“→Advanced Menu” using the and cursor
	buttons and press the Enter button to display the
	“Advanced Menu.”
3	Use the	and	cursor buttons to select
	“2. Input Setup” and then press the Enter
	button.
	The “Input Setup” menu appears.
4	Use the	and	cursor buttons to select

“12V Trigger” and then press the Enter button.

The “12V Trigger” menu appears.

5 Use the and cursor buttons to select an item and then use the and cursor buttons to set the desired setting.

2-7.12V Trigger Setup

Input:DVD

a.Trigger	A	:On
b.Trigger	B	:Off
		Quit:SETUP

This sub-menu allows you to make the required settings to turn on the output from the 12V TRIGGER terminal to control another compo- nent or device with the DTR-7.4 for each input source.

a. Trigger A

On: Select to activate the device connected to the 12V TRIGGER A terminal when the input source is selected.

Off: Select when no device is connected to the 12V TRIGGER A terminal or you do not want the connected device to activate.

b. Trigger B

On: Select to activate the device connected to the 12V TRIGGER B terminal when the input source is selected.

Off: Select when no device is connected to the 12V TRIGGER B terminal or you do not want the connected device to activate.

6 Press the Setup button to return to the main menu.

Making Full Use of Your DTR-7.4

71