Integra DTR-7.4 Recording a Source, To confirm the settings, press the Rec, Notes

Recording a Source

Input source buttons Rec Out

Standby/On											Master Volume
Phones
Audio	DVD	Video 1	Video 2	Video 3	Video 4	Video 5	Tape	Tuner	Phono	CD	Net Audio
Selector
		VCR 1	VCR 2
											DTR-7.4

To Record the Input Source Signal You are Currently Watching/Listening

This method outputs to the audio and video outputs the currently selected input source signal. This method allows you to record a signal while you are actually lis- tening to or watching it.

1					Select the input source to record
					by pressing the corresponding
DVD	Video 1	Video 2	Video 3	Video 4 Video 5	input source button.
Tape	Tuner	Phono	CD	Net Audio	The input source is now selected and you
	VCR 1	VCR 2
					may watch or listen to it as desired.

instruction manual that came with your digital record- ing equipment (e.g., MD recorder or DAT deck) to know what restrictions are imposed.

•You cannot record the source connected to the MULTI CH INPUT connector.

•When listening to music in the remote zone, you can record the music or video that is being played in the main zone.

•If you select FM (or AM) with the Tuner input source button when the recording source is set to AM (or FM), the output for the recording source also changes to AM (or FM).

To Record an Input Source Signal Different from that You are Currently Watching/Listening

Follow the procedure given below to record an input source signal different from that which you are listening to or watching at the time of recording.

1 Rec Out Press the Rec Out button.

2

Rec Out

Press the Rec Out button repeat- edly until “Rec Sel:SOURCE” appears in the front display.

The signal from the currently selected input source is now output to the TAPE OUT, VIDEO 1 OUT, VIDEO 2 OUT outputs for recording.

2

DVD	Video 1	Video 2	Video 3	Video 4	Video 5
	VCR 1	VCR 2
Tape	Tuner	Phono	CD	Net Audio

Within 8 seconds, press the input source selector button of the input source signal that you wish to record.

The signal from the selected input source is now output to the TAPE OUT, VIDEO 1 OUT, and VIDEO 2 OUT outputs for recording.

3		Start recording at the recording
		component as desired.
	Rec Out	To confirm the settings, press the Rec
		Out button. The current settings will
		appear for 8 seconds in the front display.

Notes:

•If you change the input source during recording, you will record the signals from the newly selected input source.

•You cannot record the surround effects.

•Digital signals input to the DIGITAL IN (COAX) and DIGITAL IN (OPT) inputs will be output to the DIG- ITAL OUT (OPT) output. However, MP3, WMA, WAVE (PCM), and other music formats played using Net Audio are only output as analog audio.

•Digital input signals are only output to the digital out- puts and analog input signals are only output from the analog outputs. There is no conversion from digital to analog or vice versa. When connecting CD players and other digital components, do not connect only the digital terminals, but the analog ones as well.

•There are some restrictions on recording digital sig- nals. When making digital recordings, consult the

3	Start recording at the recording
	component as desired.
	Rec Out
	To confirm the settings, press the Rec
	Out button. The current settings will
	appear for 8 seconds in the front display.

Notes:

•Be aware that the remote (Zone 2) and recording (REC OUT) outputs use the same circuit and therefore cannot be used at the same time.

•You cannot record the surround effects.

•Digital signals input to the DIGITAL IN (COAX) and DIGITAL IN (OPT) inputs will be output to the DIG- ITAL OUT (OPT) outputs.

•There are some restrictions on recording digital sig- nals. When making digital recordings, consult the instruction manual that came with your digital record- ing equipment (e.g., MD recorder or DAT deck) to know what restrictions are imposed.

•You cannot record the source connected to the MULTI CH INPUT connector.

•You cannot listen to a broadcast from one station while recording the broadcast from another.

50