Setup Menu, Basic, Advanced | Integra DTR-7.4 specs

Setup Menu

When making the various settings required to conﬁgure your DTR-7.4 for optimum performance, you can either use the OSD Menu that appears on your television monitor or you can use the display on the front of the DTR-7.4. The OSD Menu is a settings menu that is displayed on your TV monitor. For your reference when performing the setting proce- dures, this manual shows both the OSD Menu displayed on your television monitor and the display on the front of the DTR-7.4.

The Setup Menu consists of the Basic Menu that is divided up into 4 menus, the Hardware Setup Menu, the Speaker Setup Menu, the Input Setup Menu, and the Audio Adjust Menu, and the Advanced Menu that contains the menus of the Basic Menu, the Preference Menu, and the Network Setup Menu. These menus are then divided up into various sub- menus, and these contain settings for you to optimize your home theater as you wish.

The display shown below is an example. The actual contents of your display may differ depending on the model of your region and the selected input source.

Note:

Basic

Advanced

The Hardware Setup Menu is accessible from the Basic

Menu

Menu

Basic Menu

Menu at an initial setting. After being brought up on the

0.Hardware Setup

screen and setting any of its items, the menu is no longer

1.Speaker Setup

available from the Basic Menu.

2.Input Setup

In this case, you can gain access to the menu via the

3.Audio Adjust

“→Advanced Menu.”

30

→Advanced Menu

32

[ENTER]Quit:[SETUP]

Basic Menu

36

Your DTR-7.4 is provided with a

2.Input Setup

Basic Menu for those who are not

Input:DVD

38

64

familiar with many of the advanced

1.Digital Setup

settings of an AV receiver or for

2.Multichannel Setup

38

those who wish to watch movies and

3.Video Setup

4.Character Input

listen to music with a minimal

5.IntelliVolume

52

amount of setup. With the Basic

6.Listening Mode Preset

7.12V Trigger

Menu, the settings that rarely need to

[ENTER]Quit:[SETUP]

53

be set or that are only needed for

56

advanced ﬁne-tuning of the sound

quality are not displayed.

71

Advanced Menu	3.Audio Adjust		54
0.Hardware Setup			54
0.Hardware Setup	1.Tone Control
1.Speaker Setup	1.Tone Control		54
2.Input Setup	2.Surround Speakers		54
3.Audio Adjust	3.Sound Effect
4.Preference	4.Delay		55
5.Network Setup	5.LFE Level		55
→Basic Menu	6.Mono
	7.Theater-Dimensional
[ENTER]Quit:[SETUP]	8.Surround
[ENTER]Quit:[SETUP]
Advanced Menu	3.Audio Adjust		57
The Advanced Menu provides fea-	3.Audio Adjust		57
The Advanced Menu provides fea-
tures such as the Listening Mode	9.THX
Presets that allow you to customize	9.THX
Presets that allow you to customize	10.Mono Movie
the output sound for movies and	10.Mono Movie
the output sound for movies and	11.Enhance
music just the way you like and the	12.Orchestra
music just the way you like and the	13.Unplugged
AV Sync Setup that allows you to	13.Unplugged
AV Sync Setup that allows you to	14.Studio-Mix
adjust for discrepancies between the	15.TV Logic	→default
adjust for discrepancies between the
video and audio timing.
video and audio timing.
			62
			76

28

Image 28

Integra DTR-7.4 instruction manual Setup Menu, Basic, Advanced

Contents

DTR-7.4 Important Safety Instructions Precautions Table of Contents Table of Contents Features Supplied Accessories Before Using the DTR-7.4 Installing the BatteriesUsing the Remote Controller Remote control sensor DTR-7.4 Standby indicator Index Parts and Facilities Front PanelsProtective caps Protective caps Index Parts and Facilities Front Panel Display Rear Panel Digital IN/OUT PRE OUT 18, 25Antenna Zone 2 OUT Remote Controller Amp Mode Remote Controller Connecting Antenna Connecting the AM Loop AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shown Connecting an Outdoor FM Antenna Connecting AntennaConnecting an Outdoor AM Antenna About HomeTheater How to use speakersEnjoying Home Theater Speaker Placement Important Points Regarding Speaker Placement Using the Speaker Cable Labels Connecting SpeakersSpeaker channels are colored as follows AV Cables and Connectors Connecting to Audio/Video Equipment Connecting a Television Monitor or Projector Monitor OUTﬂow of the video signals is as follows TV,PB projector Etc.PR Connecting to Audio/Video Equipment DVD player Digital device DVD recorder Satellite tuner, television, or settop box Connecting a Compact Disc Player CD Connecting Video Camera, etc. Video 5 InputConnecting a Turntable Phono Ground wire earth Connecting the Power Cords from Other Devices USA and Canadian models Australian model Connecting Auxiliary Power Ampliﬁer Surround back right speakerSurround right Center speaker Connecting -compatible AV Components Connections for Remote ControlPower on/ready function Power off function Connecting the Power Turning on the PowerConnecting the Supplied Power Cord Turning on the Power from the Remote Controller Setup Menu BasicMenu Advanced Setup Menu ΜNavigating Through the Setup Menu Hardware Setup Hardware Setup menu appearsDisplay the main menu Speaker Impedance Sub-menu Remote Setup Sub-menu Selecting the Appropriate Setting for Your ConnectionsSurr Back/Zone 2 Sub-menu Changing the Remote Controller’s Control ID Speaker SetupTV Format Sub-menu Speaker Conﬁg Sub-menu Speaker Distance Sub-menu Use the and cursor buttons to select Left Level Calibration Sub-menuPress the cursor button again Conﬁguring Input Settings Suitable for Your Connections To Change the Display of the Input Source from Tape to MD Input Setup Conﬁguring Input Settings Suitable for Your ConnectionsDigital Setup Sub-menu When NET AUDIO, FM, or Initial settings for each input source Digital Format Multichannel Setup Sub-menu When NET Audio Video Setup Sub-menuVideo Component Video DTR Your Listening with headphones Enjoying Music or Videos with the DTR-7.4Basic Operation Temporarily turning off the sound Using the Sleep Timer remote controller only Adjusting the brightness of the front displayEnjoying Music or Videos with the DTR-7.4 Temporarily Changing the Speaker Output Levels Switching the display DTR-7.4 or the remote controllerDialog norm DTR-7.4Press the Display button on Changing the audio mode Adjusting the bass and trebleInput source you want to set Press the scroll wheel and then Using the Listening Modes Listening Modes Using the Listening Modes Selecting the Listening Mode Select the input sourceStart playback on the device you Selected for input THX Changes the listening mode to the THX listening mode Relationship between input source and listening mode Tuning Into a Radio Station Listening to a stereo radio station FM modeListening to Radio Broadcasts Specifying Radio Stations by Frequency Presetting a Radio Station Selecting a preset radio stationErasing a preset radio station Listening to Radio Broadcasts Recording a Source Recording a Source Input Setup Basic Select 2. Input Setup and thenLabelling the Input Source Character Input Input source you want to name Input Setup Basic Audio Adjust Basic Adjusting the Bass and Treble Sound Tone Control Audio Adjust Basic Setting the Various Sound Effects Sound Effect Input Setup Advanced Press the scroll wheel, and then press the Setup buttonInput Setup and then press the Enter Press the Setup button to return to the main menu Input Setup Advanced Audio Adjust AdvancedAdjusting the Audio Delay Delay Sub-menu Audio Adjust Advanced Setting the Low Frequency Effect Levels LFE LevelDetailed Settings for Each Listening Mode Mono Sub-menu Theater-Dimensional Sub-menu Surround Sub-menu Pro Logic II Music Dimension Dolby Digital EX Dolby DDTS-ES Pro Logic II Music Panorama THX Sub-menu Volume Setup Sub-menu Preference Advanced Adjusting the Headphone Volume Level Headphones Level Setting the Background Color for OSD OSD SetupSwitching the OSD Position Preference Advanced Setup for Multichannel Output Connecting to Devices with Analog Multichannel OutputEnjoying Analog Multichannel Audio Playback Changing the listening mode Using the tone controlEnjoying Analog Multichannel Audio Playback Playing Analog Multichannel Audio Connecting Zone Using a Receiver/Integrated Amp in ZoneUsing a Power Amp in Zone Using Only Speakers in Zone Performing the Settings for the Remote Zone Zone Enjoying Music in the Remote Zone Enjoying Music in the Remote Zone If Remote Controller Signal Does not Reach Other Components Setup Menu SeeFrom connecting block Mini plug cable DTR-7.4 Output to the IR OUT terminal Using the Remote Controller with Radio Frequency Using an External Device with 12V Trigger Terminal Connecting to an External Device with 12V Trigger TerminalConﬁguring the 12V Trigger Terminal Press the Input button, and then roll Features Internet radio featuresNet-Tune Features Enjoying Net Audio Connecting the DTR-7.4 to Your Ethernet Network Enjoying Net AudioInternet Internet radio Network Audio Server Modem To the WAN side JKL Mode button 80 Number/letter buttonsCH/Disc button Play Button Network Setup Menu Proxy Setup Sub-menu IP Address Sub-menu Input Setup Menu MAC Address Sub-menuClient Sub-menu Press the Input button, Playback OSD Display Sub-menu Select ServerPlayback OSD Display Enjoying Internet Radio Choosing a preset Internet radio station Presetting Internet radio stationsErasing a preset Internet radio station Mode button is illuminated Turn on the Network Audio ServerTurn on the DTR-7.4 While either the Input button nor Selecting a track list Use Buttons to select one From the menuPlaying a music ﬁle at random Playing a music ﬁle repeatedly Operating Onkyo Products Using the Connection Operating Onkyo Products Using the Remote ControllerDVD Mode Operating Onkyo Products Using the Remote Controller Previous/Next / buttons CD ModeFR/FF / buttons MiniDisc Mode Mode button Eject buttonCurrent track. The Next Select the next track Rewind/FF / buttons Tape ModeReverse Play button Entering a Remote Control Code Using the Remote Controller with Other ComponentsRemote Control Codes for an Onkyo DVD player Using the Remote Controller with Other Components Remote Control CodesDVD DVD Player SAT satellite receiver JBL Controlling a Satellite Receiver Controlling a VCR Following buttons control the DTR-7.4 Standby TV CH + Controlling a TV Controlling a Cable ReceiverTV VOL Learning Commands from Another Remote Controller Using Macros Making Macros Editing Remote Controller Modes Adding New Remote Controller ModesRunning Macros Naming Macros Type of mode you want to add, Reordering the Remote Controller ModesMode before which you want to Deleting Remote Controller Modes Resetting the Remote Controller Assigning Remote Controller Modes Troubleshooting Guide Symptoms Causes Remedies Troubleshooting Guide AM and FM stations 101 If One of the Messages Shown Below Appears Speciﬁcations Amplifier Section 104