Integra DTR-7.4 Resetting the Remote Controller, The remote controller enters Custom, mode

Using the Remote Controller with Other Components—Continued

4	Roll the scroll wheel to select the
	mode you want to delete, and then
	press the scroll wheel.

If the mode is deleted successfully, after “OK” has been displayed, the DEL dis- play (step 3) reappears.

Assigning Remote Controller Modes

With this function you can assign a remote controller mode to an input source. This is useful when you con- nect, say, a CD recorder to the TAPE IN/OUT sockets. By assigning the CDR remote controller mode to the TAPE input source, you can use the remote controller to control the CD recorder.

1	Press and hold the Custom button
Custom	for more than three seconds.
	The remote controller enters Custom
	mode.
2	Roll the scroll wheel to select
	“MODE,” and then press the scroll
	wheel.

3	Roll the scroll wheel to select
	“ASSGN,” and then press the
	scroll wheel.

4	Roll the scroll wheel to select an
	input source, and then press the
	scroll wheel.

5	Roll the scroll wheel to select the
	mode you want to assign to the
	specified input source, and then
	press the scroll wheel.

If the assignment is successful, after “OK” has been displayed, the ASSGN display (step 3) reappears.

Resetting the Remote Controller

You can reset the remote controller to its default set- tings.

1	Press and hold the Custom button
Custom	for more than three seconds.
	The remote controller enters Custom
	mode.
2	Roll the scroll wheel to select
	“MODE,” and then press the scroll
	wheel.

3	Roll the scroll wheel to select
	“RESET,” and then press the scroll
	wheel.

4	Roll the scroll wheel to select
	“YES,” and then press the scroll
	wheel.
	The remote controller is reset to its
	default settings.

98