Selecting the Appropriate Setting for Your Connections—Continued

Speaker Config Sub-menu

Use this sub-menu to enter which speakers are connected and the size of each speaker.

For your reference to speaker size settings, if the diameter of your speaker unit is larger than 6-1/2” (16 cm), use the “Large” setting; otherwise use the “Small” setting.

Cone diameter

1-1.Speaker Config

a.Subwoofer

:Yes

b.Front

:Small

c.Center

:Small

d.Surround

:Small

e.Surr Back

:Small

f.Crossover:80Hz(THX)

Quit:[SETUP]

a. Subwoofer

Yes: Select when a subwoofer is connected.

No: Select when a subwoofer is not connected.

b. Front

Large: Select if the front speakers are large sized.

Small: Select if the front speakers are small sized.

If “No” is selected for the Subwoofer setting, this setting is fixed to “Large.”

c.Center

None: Select if no center speaker is connected.

Large: Select if the center speaker is large sized.

Small: Select if the center speaker is small sized.

If “Small” is selected for the Front setting, “Large” cannot be selected for this setting.

d.Surround

None: Select if no surround left and right speakers are connected.

Large: Select if the surround left and right speakers are large sized.

Small: Select if the surround left and right speakers are small sized.

If “Small” is selected for the Front setting, “Large” cannot be selected for this setting.

e.Surr Back

None: Select if no surround back left and right speakers are connected.

Large: Select if the surround back left and right speakers are large sized.

Small: Select if the surround back left and right speakers are small sized.

If “None” is selected for the Surround setting, this setting cannot be selected.

If “Small” is selected for the Surround setting, “Large” cannot be selected for this setting.

If the Surr Back/Zone 2 setting in the Surr Back/ Zone 2 Sub-menu of the Hardware Setup Menu is set to “Zone 2,” this setting cannot be selected.

f.Crossover

This setting allows you to set the crossover frequency for your speaker system. The crossover frequency is the minimum frequency delivered to a speaker and can be set to 40 Hz, 60 Hz, 80 Hz (THX), 100 Hz, 120 Hz, or 150 Hz.

Select “80Hz (THX)” if you are using a THX-certified

speaker system. This setting is valid when “Subwoofer” is set to “Yes,” or for speakers that are set to “Small,” at the “Speaker Config” menu. Frequencies below this are cut from speakers set to “Small” and sent to the subwoofer (or to speakers set to “Large”).

Note:

When “Large” is set, the complete frequency range for that speaker channel will be output. When “Small” is set, the frequencies below 80 Hz for that speaker channel are output to the subwoofer. If Subwoofer is set to “No” in the 1-1. Speaker Config Sub-menu, then they will be output to the left and right front speakers.

Set all speakers for THX speaker systems to “small.”

Speaker Distance Sub-menu

Use this sub-menu to enter the distance from each speaker to the normal listening position.

Notes:

Speakers that you selected “No” or “None” for in the Speaker Config Sub-menu cannot be selected in this sub-menu.

The difference between the distances of different speakers cannot be set to more than 20 feet (6 meters).

1-2.Speaker Distance

a.Unit

:feet

b.Left

:12.0ft

c.Center

:12.0ft

d.Right

:12.0ft

e.Surr Right

: 7.0ft

f.Surr Back R : 7.0ft

g.Surr

Back L : 7.0ft

h.Surr

Left

: 7.0ft

i.Subwoofer

:12.0ft

Quit:[SETUP]

a. Unit

feet: Select if you will enter the distances in feet.

meters: Select if you will enter the distances in meters.

b. Left

Set the distance from the front left speaker to your normal listening position. This can be set between 1 and 30 feet in 0.5 feet increments (between 0.3 and 9 meters in 0.15 meter increments).

c. Center

Set the distance from the center speaker to your normal listening position. This can be set between 1 and 30 feet in 0.5 feet increments (between 0.3 and 9 meters in 0.15 meter increments).

Setting Up Your DTR-7.4

33

Page 33
Image 33
Integra DTR-7.4 instruction manual Speaker Config Sub-menu, Speaker Distance Sub-menu