C H A P T E R 3

Intel Express 10/100 Fast Ethernet Switch

set-slip-conf <IPaddress> <netmask> <broadcast> Sets the SLIP configuration.

get-gatew

Displays the default gateway.

set-gatew <IPaddress>

Sets the default gateway.

get-arp-tbl

Displays the Address Resolution Protocol (ARP) table.

del-arp-entry <IPaddress*> Deletes one or all entries from the ARP table.

add-arp-entry <IPaddress> <mac_address> <port> Adds an entry to the ARP table.

get-bootp

Displays the state of the BOOTP process.

set-bootp

Enables or disables the BOOTP process.

ping <IPaddress> {<number>0} Contacts another IP device.

ping-stop

Stops the ping process.

get-def-ttl

Displays the running default TTL (time to live) value.

set-def-ttl <number>

Modifies the running default TTL value.

SNMP Commands

get-comm

Displays the current read or write community.

set-comm {readwrite} <community-string> Changes the read or write community.

get-auth

Displays the trap authentication mode.

set-auth {onoff}

Sets the trap authentication mode.

get-traps

Displays the destination stations in the trap list.

add-trap <IPaddress> <trap-community>Adds a destination station to the trap list.

del-trap <IPaddress>

Deletes a destination station from the trap list.

34

Page 37
Image 37
Intel 10/100 manual Snmp Commands