Intel 10/100 manual Spanning Tree Commands

C H A P T E R 3 Intel Express 10/100 Fast Ethernet Switch

get-svlan-tbl {runnvram}

Displays the SVLAN table.

set-mon-port <port>

Sets the monitoring port.

monitor <port>

Starts port monitoring.

stop-mon

Stops port monitoring.

get-lt-filter <mac_address> Displays the filter for a given MAC address.

get-con-matrix

Displays the VLAN connectivity matrix.

get-vbc-matrix

Displays the VBC connectivity matrix.

Spanning Tree Commands

get-stp

Displays the spanning tree session state.

set-stp {enabledisable}

Enables or disables the spanning tree for the next session.

get-st-bcfg

Displays the spanning tree bridge parameters.

get-st-pcfg

Displays the spanning tree port parameters table.

get-st-syscfg

Displays the spanning tree system ports configuration.

set-br-prio <priority>

Sets the spanning tree bridge priority.

set-br-maxage <maxage>

Sets the spanning tree bridge maximum age.

set-br-hellot <hello_time>

Sets the spanning tree bridge hello time.

set-br-fwdel <forward_delay>

Sets the spanning tree bridge forward delay.

set-prt-prio <port_number> <port_priority> Sets the spanning tree port priority.

set-prt-enb <port_number> {enabledisable} Enables or disables the spanning tree port.

set-prt-pcost <port_number> <path_cost>

Sets the spanning tree port path cost.

36