Intel 273246-002 manual Overview, Processor Assembly Features

Getting Started 2

This chapter identifies the Development Kit’s key components, features and specifications, and tells you how to set up the board for operation.

2.1Overview

The evaluation board consists of a baseboard and a processor assembly.

•The processor assembly contains an Intel® Celeron™ Processor and an 82443BX Host Bridge/Controller.

•The baseboard contains the 82371EB PCI ISA IDE Xcelerator (PIIX4E) and other system board components and peripheral connectors.

Warning: The processor assembly is attached to the baseboard at the factory. Do not remove the processor assembly from the baseboard. Intel will not support the processor assembly or the baseboard if any portion of the assembly is removed by the customer.

2.1.1Processor Assembly Features

The processor assembly features are summarized below.

•Celeron Processor in a PPGA package (Socket-370) with 66-MHz system bus frequencies

•Intel 440BX AGPset: 82443BX Host Bridge/Controller

•66 MHz memory interface: A wide range of DRAM support including:

—64-bit memory data interface plus 8 ECC bits and hardware scrubbing

—60 ns EDO DRAM and 66 MHz SDRAM support

—16 Mbit and 64 Mbit DRAM technologies

•Five PCI masters

—PCI Specification Rev 2.1 Compliant

•Accelerated Graphics Port (AGP) Support:

—AGP Interface Specification Revision 1.0 compliant

—AGP - 66/133 MHz, 3.3-V device support

•Integrated System Power Management support

Celeron™ Processor Development Kit Manual 2-1