Mobile Board Features
17
Processor
Intel Mobile Board MGM45WU supports the following Intel® processors in the mPGA479
package:
Intel Core 2 Duo mobile processors with a 1066/800 FSB
Intel Celeron mobile processors with a 667 FSB
Processors are not included with the Mobile Board and must be purchased separately.
For instructions on installing a processor, go to page 37 in Chapter 2.
System Memory
NOTE
To be fully compliant with all applicable Intel
® SDRAM memory specifications, the
board should be populated with DIMMs that support the Serial Presence Detect (SPD)
data structure. If your memory modules do not support SPD, you will see a
notification to this effect on the screen at power up. The BIOS will attempt to
configure the memory controller for normal operation.
The Mobile Board supports the dual or single channel memory configurations defined
below.
Two 200-pin Double Data Rate 2 (DDR2) Small Outline Dual Inline Memory Module
(SO-DIMM) sockets with gold-plated contacts
Support for:
Non-ECC DDR2 800/667 memory
Serial Presence Detect (SPD) memory only
Unbuffered, non-registered single- or double-sided DIMMs
Memory configurations listed below:
Up to 2.0 GB utilizing 256 Mb technology
Up to 4.0 GB utilizing 512 Mb or 1 Gb technology
For instructions on installing memory, refer to “Installing System Memory” on page 56
in Chapter 2.