Installing and Replacing Mobile Board Components
Installing a Hard Disk Drive
To install a hard disk drive in the chassis, see Figure 21 and follow these steps:
1.Observe the precautions in "Before You Begin" on page 35.
2.Attach the disk drive mounting bracket (Figure 21, A) to the hard disk drive (Figure 21, B) with four screws (Figure 21, C) as shown.
3.Insert the hard disk drive/bracket assembly into the disk drive bay (Figure 21, E) and engage the Mobile Board connector. You can use the pull tab (Figure 21, D) to facilitate installation.
Figure 21. Installing a Hard Disk Drive
53
